Bright white, flat matt finish
High-opacity white
Smooth, consistent matt finish
Helps reduce flashing, roller splatter & marks
Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Ceilings can be unforgiving. Natural light, large windows and spotlights can expose flashing, patchy coverage and unwanted roller marks.
Seamless Non-Reflective Ceiling Paint has been developed to create a flatter, more consistent white finish, even in rooms with challenging lighting. Its high-opacity formula provides excellent covering power, while reduced roller splatter helps make application cleaner and easier.
The flat matt finish minimises distracting reflections and helps disguise minor surface imperfections, leaving ceilings looking smoother, brighter and beautifully seamless.
Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.
There is £7.50 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
Ceilings are often exposed to light from windows, spotlights and pendant fittings. This can make flashing, patchy coverage and roller marks much easier to see.
Seamless Ceiling Paint dries to a flat, non-reflective finish that helps minimise distracting glare. Its high opacity and smooth application help create a more consistent appearance across the ceiling—even when viewed from different angles.
The result is a clean, bright white finish designed to look smoother and more uniform throughout the room.
Make sure the surface is clean, dry and free from grease. Remove any loose or peeling paint. Lightly sand glossy surfaces with fine abrasive paper, then remove all dust and residue.
Fill cracks and surface defects with a suitable filler, then sand smooth. Treat powdery surfaces with a suitable stabilising solution and spot-prime exposed nail heads with a rust-resistant primer.
On new plaster or other absorbent surfaces, dilute the first coat with one part clean water to ten parts paint.
Mix the paint thoroughly before use with a suitable mixing tool. If you are using more than one tin, combine them in a larger container before painting to ensure a consistent finish.
Apply by brush, roller or suitable spray equipment. For the best roller finish, use an AllPro microfibre roller sleeve. Maintain a wet edge as you work and avoid spreading the paint too thinly.
For the best coverage and finish, apply two full coats.
Under normal conditions, the paint will be touch dry in 1–2 hours. Allow at least 4 hours before applying the second coat.
Avoid painting in high humidity or when the air or surface temperature is below 5°C, as this may affect drying and the final finish.
Remove as much paint as possible from brushes and rollers, then clean them immediately using warm, soapy water. Do not pour leftover paint or cleaning water into drains or watercourses.
Use a minimum working pressure of 140 kg/cm² (2,000 psi) with a 0.38–0.46 mm (15–18 thou) spray tip, a 65° spray angle and a 60-mesh filter. Always follow the spray-equipment manufacturer’s instructions.
