Macpherson Trade Vinyl Matt 10L – Brilliant White

Macpherson Trade Vinyl Matt is a water-based interior emulsion designed for most wall and ceiling surfaces where a fashionable flat matt finish is required. It’s a practical choice for both trade decorators and DIY jobs where you want a clean, modern look with reliable day-to-day durability.

Ideal for larger rooms and repeat-work areas, the 10L size helps keep coverage and downtime in check, with touch dry in around 2 hours and recoat after 4 hours under normal conditions.

Key benefits

• Flat matt finish for a modern, non-reflective look
• Suitable for most interior walls and ceilings
• Water-based for easy clean-up
• Touch dry in around 2 hours; recoat after 4 hours (normal conditions)
• Spreading rate up to 16m² per litre on smooth surfaces
• Low VOC: contains max. 1 g/L (EU limit cat. A/a: 30 g/L)
• Apply by roller, brush, or spray (airless dilution may be required)

Best for

• Trade: fast-turnaround repaints, rentals, offices, and large wall/ceiling areas
• DIY: living rooms, bedrooms, hallways, and ceilings where you want a flat matt finish

Key features & why it matters

• Fast recoat cycle: helps you get the second coat on the same day in many jobs
• Coverage-led value: up to 16m²/L on smooth surfaces for planning tins per room
• Low VOC formulation: better suited to interior use where you want minimal VOC impact

Specifications

What’s included

• Macpherson Trade Vinyl Matt Emulsion – 10L tin (Brilliant White)

How to use (application guide)

• Ensure surfaces are sound, clean, dry, and free from contaminants that could affect adhesion.
• Stir well before and during use.
• Apply using a good quality synthetic brush or medium pile roller.
• For airless spray, dilution may be required – follow your spray equipment manufacturer’s guidance.
• Apply two coats. Certain colours may need additional coats for full obliteration.
• Under normal conditions, allow around 2 hours to touch dry and 4 hours before recoating. Ensure adequate ventilation during drying.
• Avoid applying if temperatures may fall below 8°C or if relative humidity is above 80% during application/drying.

Care & maintenance

• Between redecoration cycles, surfaces may be wiped with warm water and a liquid detergent solution to remove surface dirt.

Cleaning & storage

• Return surplus material to the container.
• Wash tools and equipment with clean water or warm soapy water immediately after use.
• Store upright, closed, and secure. Keep out of reach of children and animals. Do not store below 5°C or above 40°C.

Data sheets

• Product Data Sheet (PDF)
• Safety Data Sheet (PDF)

Accessories & add-ons

• Rollers & sleeves (trade 9" / 12"), roller frame and extension pole
• Brushes
• Paint scuttle/tray and liners
• Masking tape, dust sheets, protective film
• Abrasives/sanding pads for surface prep
• PPE: gloves, eye protection, and respiratory protection for spraying

Delivery & returns

Free UK delivery on orders over £50. 28-day returns for peace of mind.

Why buy from LDM Direct?

• UK stock and fast dispatch
• Trade-friendly service and helpful advice
• Independent, family-owned business
• 16 decorating stores nationwide (online, in-store & click & collect)

FAQs

Is Macpherson Trade Vinyl Matt suitable for ceilings?

Yes. The product data sheet states it’s suitable for interior walls and ceilings, giving a flat matt finish.

What surfaces can I use it on?

It’s designed for most interior wall and ceiling surfaces. For tricky or previously coated surfaces, follow the preparation guidance in the product data sheet.

How long does it take to dry?

Under normal drying conditions (20°C / 65% RH), it’s touch dry in about 2 hours.

When can I apply a second coat?

Under normal drying conditions (20°C / 65% RH), you can recoat after 4 hours.

How far will 10L go?

The stated spreading rate is up to 16m² per litre on smooth surfaces. Coverage varies with surface texture and porosity.

How many coats do I need?

The data sheet recommends applying two coats. Certain colours may require additional coats for complete obliteration.

Can I apply this with a sprayer?

Yes. The data sheet lists roller, brush or spray application. For airless spray, dilution may be required—follow your spray manufacturer’s guidelines.

How do I clean rollers and brushes after use?

Return surplus material to the container, then wash tools and equipment with clean water or warm soapy water immediately after use.

Are there any temperature or humidity limits?

Yes. Do not apply if air or substrate temperatures are likely to fall below 8°C, or when relative humidity is above 80% during application or drying.

Is it low VOC?

Yes. The product data sheet states the EU limit for its category is 30 g/L and that the product contains a maximum of 1 g/L VOC.

Do you have a Safety Data Sheet?

Yes—use the “Safety Data Sheet (PDF)” link in the Data sheets section on this page for handling, storage and ingredient safety information.

What accessories do I need for the job?

For best results, pair it with trade-quality rollers/sleeves, brushes, trays/scuttles, masking and surface protection, abrasives for prep, and PPE if spraying.

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is £7.50 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.